Model 4510

SPECIFICATION
Construction
Stainless steel and PTFE.
Dimensions
See Broshure
Cable
Hi-Flex 30 kV screened cable with 70 mm bend diameter.
Standard length is 2 m – longer lengths can be specified at time of order (subject to maximum load on power unit).
Safety
100 Mohm resistance in series with HV for shockless operation.
Power Unit
Use with Fraser 5.5kV and 6 kV Power Units. See Datasheets.
Air Supply
Air Pressure: maximum 7 Bar.
Air Consumption: 2 Bar: 180 l/min. 7 Bar: 520 l/min.
Air Fitting: push-fit connector for 8mm OD Tubing
Environmental
60 °C maximum temperature. 70 % rH non-condensing max.
Noise: 76 dBA @ 7 Bar.
Certification
CE.

Model 4800

SPECIFICATION
Construction
Static Eliminator: PVC body, epoxy resin encapsulant, tungsten emitters.
Nozzle: aluminium.
Dimensions
80 x 51 x 33 mm (L x W x D) excluding connectors.
Operational Length: 47 mm.
Weight
Static Eliminator – 100 g, Nozzle – 60 g (excluding connectors).
Output Voltage
+/- 7 kV supply integrated inside Ioniser.
Remote Monitor / Local Status Indication
Signals available: ‘OK’, ‘Clean Me’, ‘Fault’ and ‘Standby’. Uses 24 V supply to send signal from the ioniser to the PLC or other destination. Outputs compatible with IEC 61131-2 Type 3 PLC inputs. Signal protected against short circuit or miswiring. Bi-colour LED on ioniser body for local status indication.
Electrical Input
24 V DC (21 – 28 V). Maximum current 0.25 A. M8 connector.
For PSU and cable options, see 3024 UC Datasheet.
Air Supply
Air Pressure: Max 10 Bar.
Air Fitting: 6 mm OD push fit.
Air Consumption: 300 l/min @ 2 Bar.
Blowing Force: 2.4 N @ 2 Bar.
Environmental
0 – 55 °C, 70 % rH non-condensing max. IP67.
Certification
CE and UL Certified (3024 Ultra-Compact incorporated within 4800 DC).

Model 8001

SPECIFICATION
Construction
PVC body, stainless steel base, tungsten emitter.
Dimensions
123 mm x 25 mm x 32 mm (L x W x H).
Weight
80 g.
Outpt Voltage
Up to 3 kV supply integrated into the Ioniser. 65 – 70 kHz.
Remote Monitor / Local Status Indication
Two signals available: ‘OK’ and ‘Attention’.
Outputs compatible with IEC 61131-2 Type 3 PLC inputs. Signal protected against shorting and miswiring.
Three colour LEDS on Ioniser for local status indication.
Electrical Input
Input: 24 V DC (21 – 28 V), max current 0.1 A. M8 x 4-pin male connector.
M8 x 4 core cable to be ordered separately.
Air Supply
0 – 5 Bar max. 0.5 – 2.0 Bar optimum.
Clean, dry air. Push-fit connector for 6 mm OD tubing.
Environmental
0 – 55 °C, 70 % rH non-condensing max.
Certification
CE. Cleanroom classification ISO Class 4.
Options
100 – 250 V AC PSU also available.

Model 4110

SPECIFICATION
Input Voltage
24 VDC, 2.2 W Max.
Ion Emission
High Frequency AC (70 kHz)
Balance
Average ≤±10 V, Max ≤±30 V
Discharge Time
±1000 V to ±100 V less than 1 sec (15cm)

Emitter Points
Tungsten 99.99%
Alarm
Visual & Audio alarm operate for power failures
Monitoring
FMS monitoring interface
Air Pressure
0.1 – 0.5 Mpa
Air Inlet
6mm Inlet
Material
Enclosure: ABS Plastic
Nozzle: Teflon
Bracket: SUS
Dimensions (mm)
134W x 56H x 25D (without bracket)
134W x 62H x 25D (with bracket)
Weight
90g (with bracket)
Warranty
1 year limited warranty

Related Products

  • Emitter Points
  • ㆍModel 4111
  • IR Sensor Remote Control Air Pressure for Model 4110
  • Accessories
  • ㆍModel 4110U
  • Nozzle Head Assembly with Uretha Air Tube

Model 4120

SPECIFICATION
Input Voltage
24 VDC, 4.1 W Max.
Ion Emission
High Frequency AC (70 kHz)
Balance
Average ≤±10 V, Max ≤±30 V
Discharge Time
±1000 V to ±100 V less than 1 sec (15cm)

Emitter Points
Tungsten 99.99%
Alarm
Visual & Audio alarm operate for power failures
Monitoring
FMS monitoring interface
Air Pressure
0.1 – 0.5 Mpa
Air Inlet
6mm Inlet
Detection Method
Diffuse reflection
Detection Distance
≤ 1m
Response Time
≤ 1ms
Initial activation time is less than 500ms, Normal operation time is less than 1ms for recovery.
IR Sensor
Light On / Dark On (2 step operation)
Ambienet Illumination
Sunlight : ≤ 11,000 Lux,
Incandescent Lamp : ≤ 3,000 Lux (Receiving surface illumination)
Material
Enclosure: ABS Plastic
Nozzle: Teflon
Bracket: SUS
Dimensions (mm)
134W x 62H x 40D (with bracket)
Weight
170g (with bracket)
Warranty
1 year limited warranty

Related Products

  • Controller
  • ㆍModel 4111
  • IR Sensor Remote Control Air Pressure