Room Ionization – 코어인사이트

Model 2200


Input Voltage	FR-ABS industrial grade extrusion, epoxy resin, tungsten emitters.	Output Voltage	22 x 41.5 mm (W x H).Available Lengths: minimum order length 250 mm, then in 50 mm steps to 5000 mm.
Ion Emission	1.1 kg/m.	Display	Up to 11 kV supply integrated into bar.
Control	Signals available: ‘Bar OK’ and ‘Fault’.Uses 24 V supply to send signal from the bar to the PLC or other destination. Bi-colour LED on endcap for local status indication.	Timing	24 V DC (21-28 V), maximum current required 0.5 A.M8 x 4-pin connector. The M8 x 4-core cable must be ordered separately.
Communication	0 – 55 °C, 70 % rH non-condensing max.IP66.Fully sealed.	Emitter-Point	CE, CB and UL.Cleanroom classification to ISO Class 4.
Alarm	100 – 250 V AC-DC 24 V Power Supply (Part No: E3024-PSU).	Output Monitoring	Relay Output
Material	Enclosure: ABS, Emitter Nozzle: Polycarbonate	Operating Environment	Temperature: 15~35℃ Humidity: 30~60% RH
Dimensions	86H x 85D x 1000, 1500, 1700 and 2000L	Warranty	1 year limited warranty


Input Voltage	24 VAC, 1.2 W Max	Output Voltage	±10 kV DC, 100 V resolution adjustment
Ion Emission	Pulsed DC Technology	Balance	Adjustable for each applications
Display	3 digit LED display	Control	Voltage, On time and Off time are adjusted by Model 5711R or Model 6300 series controller
Timing	ON Time: 0.1 – 15.0 sec / 0.1 sec resolution adjustment OFF Time: 0.1 -10.0 sec / 0.1 sec resolution adjustment	Connectors	RJ-45 Ethernet Type
Emitter Points	Single Crystal Silicon or Titanium. All emitter points are replaceable	Cleanliness	Silicon Emitter compatible to ISO 14644-1 Class 1 Titanium Emitter compatible to ISO 14644-1 Class 3
Emitter Rods	150, 300, 450, 600, 750 and 900 mm. Custom length is available	Alarm	Visual & Audio alarm operate voltage feedback monitoring, cleaning cycle, sync and polling failures
Monitoring	RS-485 terminal on Model 6300 series controller	Operation Mode	Pulsed DC, stand-by and individual ON/OFF control
Operation Environment	Temperature: 15-35 °C, nominal Humidity: 20 -60% RH, non-condensing	Material	ABS plastic, Polycarbonate
Dimensions (mm)	500W x 46H x 42D	Weight	410g (without rods)
Warranty	2 year limited warranty


Input Voltage	24 VAC, 1.4 W Max.	Output Voltage	±12 kV DC, 100 V resoultion adjustment
Ion Emission	Pulsed DC Technology	Balance	Adjustable for each applications
Display	4 digit LED display	Control	Voltage, On time and Off time are adjusted by Model 5711R or Model 6300 series controller
Timing	ON Time: 0.1 – 15.0 sec / 0.1 sec resolution adjustment OFF Time: 0.1 -10.0 sec / 0.1 sec resolution adjustment	Connectors	RJ-11 modular terminal
Emitter Points	Single Crystal Silicon or Titanium. All emitter points are replaceable	Cleanliness	Silicon Emitter compatible to ISO 14644-1 Class 1 Titanium Emitter compatible to ISO 14644-1 Class 3
Emitter Rods	150, 300, 450, 600, 750 and 900 mm. Custom length is available	Alarm	Visual & Audio alarm operate voltage feedback monitoring, cleaning cycle, sync and polling failures
Monitoring	RS-485 terminal on Model 6300 series controller (Max. 120 units)	Operation Mode	Pulsed DC, stand-by and individual ON/OFF control
Operation Environment	Temperature: 15-35 °C, nominal Humidity: 20 -60% RH, non-condensing	Material	ABS plastic, Polycarbonate
Dimensions (mm)	450W x 30H x 36D	Weight	410g (without rods)
Warranty	2 year limited warranty