PWA-805

SPECIFICATION
Power
Not applicable. Fixture powered by resistance instrument.
Dimensions
Case: (L x W x H) 4.6″ x 2.75″ x 0.95″ (11.69 x 6.99 x 6.35 cm)
Two (2) top mounted metal cylinders: 1 fixed, 1 adjustable for cuff size)
Cylinder Diameter: 1.25″ x 1″ H (3.18 x 2.54 cm))
Adjustable cylinder equipped with knurled locking screw for positioning
Controls
Three position rocker switch:
(1) Cuff Only [Resistance between Cylinders]
(2) Cuff & Cord Assembly [Resistance from cord ground point to cuff cylinder]
(3) Cord Only [Resistance from cord ground point to cuff snap connections]
Connections
Megohmmeter: 2 banana receptacles for meter leads
Cord Groundable Point: 1 banana receptacle
2 Cord Cuff Snaps: 1 each 7mm diameter, 1 each 4mm diameter
Weight
4.5 oz.

PCF-825B

SPECIFICATION
Power
Not applicable. Fixture powered by resistance instrument.
Size
(L x H x D): 3” x 6” x 1” (7.6cm x 15.24cm x 2.5cm)
Material
Electrode : 303 Stainless Steel
Cross Bar Material : UHNW
THREADED ROD MATERIAL : Stainless Steel
Bottom Weight Material: 1018 CRS Plated (Nickel or Zinc)

제품 구성품

  • PCF-825B CAFE Fixture
  • PWS-610M Wrist Strap
  • PWS-611-PGC Wrist Starp Cord (with no resistor)
  • ABL-36 INCH Black Silicone Test Lead
  • User Manual

PGC-821

SPECIFICATION
Power
Not applicable. Fixture powered by resistance instrument.
Size
1 inch x 2 inch Electrodes mounted to an electrically conductive clamp
Material
Electrode : Plated Steel
Test Lead Connection: Brass, Nickel Plate conductive Banana Jack
Clamp Insulation: Rubber Grommet measuring >1.0xE12 ohms over a Heavy Duty Rubber Coating

제품 구성품

  • 2 each Garment Clips
  • User Manual

PFA-860

SPECIFICATION
Power
Not applicable. Fixture powered by resistance instrument.
Plate Size
17 x 11 inches. Folds to 8 x 11 x 0.25 inches
Test Wand
Stainless steel tube assembly equipped with an insulated sealing cap on end and a banana receptacle for meter lead connection at the opposite end.
Wand Size
5 1/8 inches long with 7/8 inch outer diameter

제품 구성품

  • Hinged Test Plate
  • Banana Snap
  • PFA-861-H Footwear Auditor Handle
  • User Manual

PRS-801-W

SPECIFICATION
Power
Not applicable. Fixture powered by resistance instrument.
Weight
5 lbs (2.27 kg) each ±2oz
Pad Material
Durometer hardness of 50-70.
Dimensions
Pad Contact Surface : 2.5 ± 0.1 inches (63.5 ± 0.25mm)
Height
– With Handle: 5.0 inches (127mm)
– Without Handle: 3.75 inches (95.25mm)

함께 사용하면 좋은 장비

  • PRS-800CS Cable Spacers
    -36&10 inch Length Cable Spacers with Insulated Ends

PRF-922B

SPECIFICATION
Power
Fixture powered by resistance instruments
Test Lead
RG-174 coaxial cable equipped with insulated BNC couplers, and BNC/Banana adapter for connection to Prostat PRS-801 Resistance System.
Connections
BNC with outer source and inner sense connections
Contact Size
Electronic quality gold plated contact pins: 0.1” (2.54 mm) diameter Conductive synthetic rubber contact boots: 0.123” (3.12 mm) diameter
Outer distance between the 2 contact pins:
– without rubber boots attached: 0.325” (8.26mm)
– with rubber boots attached: 0.355” (9.02mm)
Outer diameter of the probe assembly: 0.49” (12.45mm)
Dimensions
Length : 6.75 inches (171 mm) without probe covers
8.25 inches (210 mm) with probe covers
Probe diameter : 0.49 inches (12.45 mm)
Probe cover outer diameter : 0.60 inches (15.25 mm)

제품 구성품

  • PRF-922B Miniature Two-Point Probe
  • PRF-912C Connection Cable
  • BNC Adapter
  • Probe cover
  • 1 set Conductive Rubber Boots
  • 1 each Spare Center Electrode Contact
  • 2 each Spare Outer Contact Pins

PRF-912B

SPECIFICATION
Range
0.1 ~ 1.0xE12 ohms
Power
resistance instrument.
Test Lead
RG-174 coaxial cable equipped with insulated BNC couplers, and BNC/Banana adapter for connection to Prostat PRS-801 Resistance System.
Connections
BNC with outer source and inner sense connections
Dimensions
Length: 5.9 inches (150mm) without probe cover. 6.5 inches (165mm) with probe cover.
Probe diameter 0.5 inches (12.7mm).
Probe cover outer diameter 0.63 inches (16mm).

제품 구성품

  • PRF-912B Miniature Concentric Ring
  • PRF-912C Connection Cable
  • BNC Adapter
  • 1 each Spare Center Electrode Contact
  • 2 each Spare Outer Contact Pins

PRF-911

SPECIFICATION
Power
Not applicable. Fixture powered by resistance instrument.
Aligenment
5.0xE5± 1% Ohms @100 volts per ANSI/ESD STM11.11 for Surface Measurements
5.0xE5 ± 2% Ohms @10 volts
5.0xE5 ± 1% Ohms @100 volts for Volume Resistivity Measurement
5.0xE5 ± 2% Ohms @10 volts
Connections
Fixture installed BNC for Inner Disc (D1) connection, and fixture assembly ground;
dual BNC/Banana plug adapter supplied. Fixture installed standard banana receptacle for Outer Ring (D2) connection.
Dimensions
Inner electrode disc (D1) outside diameter: 1.2 inches (3.05cm) Spring Loaded
counter pressure approximately 2 lb., ± 2 ounces (0.82 Kilograms, ± 0.06 kg)
Outer electrode ring (D2) inside diameter: 2.25 inches (5.72cm) Width 0.125 inches (0.32cm)

제품 구성품

  • PRF-911 Concentric Ring
  • PTB-920 Dual Test Bed
  • PRF-911GGL 36" Green Silicone Test Lead
  • PRF-911 BNC Adapter