Skip to content

Cleaning

scroll down

Nozzle

Model 4510

High Frequency AC Nozzle Ionizer
Model 4510-1Model 4510-1
Model 4510-2Model 4510-2
Model 4510-3Model 4510-3
Fraser사의 Model 4510은 몰딩, 조립품, PCB, 자동차, 그래픽, 광학 및 의료용 부품에서 먼지와 정전기를 제거하기 위한 Fraser의 포괄적인 세척 제품 범위에 속합니다. Model 4510는 노즐 이오나이저는 효율적인 정전기 제전 및 세정을 위해 빠르고 조용하며 균질한 이온생성을 통해 정전기 제어를 돕습니다.

Fraser HP Power Unit에서 제공하는 최대 6kV의 전력은 정전기를 철저히 제전하여 재흡착 위험 없이 먼지를 제거할 수 있습니다. 노즐은 경제적인 작동을 위해 압축 공기를 최대 20배까지 증폭합니다. 간단한 설계로 집중된 공기 흐름에서 이온 및 분사되는 압축공기를 통해 최대 효과를 볼 수 있습니다.

video

FEATURES

BENEFITS

SPECIFICATION

Construction
Stainless steel and PTFE.
Dimensions
See Broshure
Cable
Hi-Flex 30 kV screened cable with 70 mm bend diameter.
Standard length is 2 m – longer lengths can be specified at time of order (subject to maximum load on power unit).
Safety
100 Mohm resistance in series with HV for shockless operation.
Power Unit
Use with Fraser 5.5kV and 6 kV Power Units. See Datasheets.
Air Supply
Air Pressure: maximum 7 Bar.
Air Consumption: 2 Bar: 180 l/min. 7 Bar: 520 l/min.
Air Fitting: push-fit connector for 8mm OD Tubing
Environmental
60 °C maximum temperature. 70 % rH non-condensing max.
Noise: 76 dBA @ 7 Bar.
Certification
CE.