Advanced Measurement - 코어인사이트 - coreinsight

Model 9903

SPECIFICATION


Dimensions	Internal: 38.75″W x 26″D x 21″H (98cm x 66xm x 53xm)External: 52″W x 31″D x 22″H (132cm x 79cm x 56cm)
Construction	Chamber: 3/8″ thick clear & white acrylicEquipment door front: 32″ x 14″ (81 x 35 cm) openingLeft side door: 1/2″ (12mm) clear acrylic with 1/2-turn latch
Hardware Ports	8″ ports with gloves (optional)1×2.25″ (57mm) Cable pass through
Controllers	Two (2) CAL 9500, multiple ramp/soak cycles, Resolution: 0.1%/0.1°
Sensor Accuracy	RH: 2.0% RH at 68°F (20°C) and 0-90% RH, ± 3.0% RH at 68°F (20°C) and 90-100% RHTemp: ± 0.4° F (± 0.2° C) at 20°C
Power	Voltage: 115/230 VAC 50/60HzCurrent: 8Amp/4Amps

Model 9910

SPECIFICATION


Dimensions	17”W x 5”H x 12”D
Construction	Metal enclosure, docks atop 9910 PinPulse.
Weight	23 lbs.
Interface	Waveform connection: Cables supplied for all supported ESD models • HBM Cable Pair, Red, Black, 6” (152mm) • MM Cable Pair, Yellow, Green, 6” (152mm) • HMM Cable Pair, Blue, Orange, 6”(152mm) Device connection: DUT stage providing connection to 128 circuits. PinScan interface is dual 64-pin ZIF sockets, .100” pin spacing.
ON/OFF	Rocker switch on front panel Indicators: Red & Green LEDs on front panel indicate status.
Communications	USB connector on rear panel.
Power	90-260 VAC, 50-60 Hz, via IEC connector on rear panel

Model 5533

SPECIFICATION


Dimensions	Internal: 38.75” W x 26” D x 21” H (98cm x 66xm x 53xm) External: 52” W x 31” D x 22” H (132cm x 79cm x 56cm)
Construction	Chamber: 3/8” thick clear & white acrylic Equipment door front: 32” x 14” (81 x 35 cm) opening Left side door: ½” (12mm) clear acrylic with ½-turn latch
Hardware Ports	8” ports with gloves (optional) 1×2.25” (57mm) Cable pass through
Controllers	Two (2) CAL 9500, multiple ramp/soak cycles, Resolution: 0.1%/0.1°
Sensor Accuracy	RH: 2.0% RH at 68°F (20°C) and 0-90% RH , ± 3.0% RH at 68°F (20°C) and 90-100% RH Temp: ± 0.4° F (± 0.2° C) at 20°C
Power	Voltage: 115/230 VAC 50/60Hz Current: 8Amp/4Amps

Model 284

SPECIFICATION


Display	½”x3½” digit LCD Range : 200nC → Resolution : 0.1nC Range : 20nC → Resolution : 0.01nC
Accuracy	2%
Output	0 to ±2 volt analog
Battery	9 volt Eveready #216 or equivalent NEDA #1604. Battery life over 400 hours.
Dimensions	6”x3½”x21/8” (15 cm x 9 cm x 5.5 cm)
Weight	8½ oz. (0.24kg) with battery

제품 구성품

OPTIONAL

Model 4431T

SPECIFICATION


Power	Voltage: 90-260VAC, 50/60Hz; 0.75 Amps max Input: IEC Socket with 6’ (2m) cable with NA plug (Std)
High Voltage Power Supply	Adjustable ±800-±1,200V
Discharge Network	STM11.31: 100pF & 1500Ω
Signal Output	Current output: Tektronix CT-1: 5mV/mA @ 500Ω:
Capacitive Sensor	Electrodes: 0.875” (22mm) stainless steel Dielectric: 0.5” (12mm) Capacitance: 6pF
Dimensions	4”W x 12”D x 6”H (102x305x152mm)

제품 구성품

PBT-531

SPECIFICATION


PDS-510 HBM Discharge Simulator
Discharge Output	Adjustable up to 4kV
Power Supply Output	Adjustable up to 4kV
Power Supply Accuracy	±2%
Discharge Waveform (ANSI/ESD STM11.31)	Rise me @ 0Ω: < 10 nsec @ 500Ω: < 20 nsec Fall me @ 0Ω: 150±15 nsec @ 500Ω: 200±20 nsec Ringing: < 15%
Power	Batteries: 4 each AA 2600 mAh low self-discharge, Rechargeable, Nickel-Metal Hydride Battery Power Supply: From 90 VAC to 264 VAC, 47 Hz to 63 Hz. UL and TUV 60950-1 approved
Battery Life	＞100 hours (with average of 50 discharges in 8 hours)
Dimensions	(L x W x H) 7.5″ x 4.5″ x 2.5″ (19.05 x 11.43 x 6.35 cm)
Weight	2.0 lbs (907g)


PBF-520 Shielded Bag Fixture
Base Material	Flame Retardant Polycarbonate
Surface Resistivity	>1×1013Ω
Discharge and Ground Electrodes	1.5” (3.8 cm) brass, gold plated
Capacitive Probe	0.830” (2.1 cm) brass, gold plated
High Voltage Resistor	500 Ohms, 1% tolerance
Support Area Surrounding the Ground Electrode	8 x 10” (20 x 25 cm), without Base Extension attached 8 x 15” (20 x 35 cm), with Base Extension attached
Dimensions	(L x W x H) 11” x 8” x 4” (27.94 x 20.32 x 10.16 cm), without Base Extension (L x W x H) 6” x 8” x 1” (15.24 x 20.32 x 2.54 cm), Base Extension
Weight	3.0 lbs (48 oz), without Base Extension 1.0 lbs (16 oz), Base Extension

제품 구성품

CT70

SPECIFICATION


AC Voltage	90.0 to 240.0V
Frequency	45.0 to 65.0Hz
Peak Line Voltage	350.0V
% Voltage Drop	0.1 to 99.9%
Dimensions	8 x 2.8 x 2” (203.2 x 71.1 x 50.8mm)
Weight	11.2 oz (317.5 g)

PGA-712

SPECIFICATION


Range	0 to ±20,000 Volts
Input	< ±2 Volts
Circuit Accuracy	<±1%
Interface	USB 2.0
Sampling Rate	50, 100 and 200 Samples per second
File Limit	≈ 1 to 15 minutes per file, continuous recording at 50 samples/second ≈ 7 minutes at 100 samples/second 3.5 minutes at 200 samples/second
USB Connector	USB-C
Power	Via USB
Compability	Windows® 10+ 2
Material	Plastic
Length	2.756″ (70 mm)
Width	1.969″ (50 mm)
Height	0.787″ (20 mm)
Weight	1.2oz (34g)
Warranty	2 year limited warranty

CVM-780

SPECIFICATION


Basic Description	High impedance contact voltmeter with active probe
DC Characteristics	Intended Operating Range: 0 to ±525 volts
Resolutions	1 volt, 3 digit display
Curcuit Accuracy	< ±1% (Note: Maximum measurement range is ±575 Volts for brief periods )
Dynamic Characteristics	Response Time: Approximately 1ms for a voltage step of 200V at the probe tip to the monitor output. Digital display update: 3 readings per second.
Input Charge / Measurement	Approximately 100 femptocoulomb/volt (1.0×10-13 C/V)
Input Impedance	= 1.0xE14 ohm in parallel with < 1pF Capacitance
Recording Deviation	Typically < ±10 volts at ± 500 Volts
Probe Tips	Probe Tips Metal Nominally 0.95 and 0.45 inch Ceramic 0.90 and 0.40 inch ±0.05”
Power	4 each Energizer NH15-2500 Nickel-Metal Hydride rechargeable batteries (AA Size)
Measurement Tolerance	When measuring DC voltage reference 500 V Less or Equal to ±2 V 100 V Less or Equal to ±2 V 50 V Less or Equal to ±2 V 10 V Less or Equal to ±1 V When measuring floating conductors 500 V Less or Equal to ±5% ±2 Counts 100 V Less or Equal to ±5% ±2 Counts 50 V Less or Equal to ±5% ±2 Counts 10 V Less or Equal to ±10% ±2 Counts

제품 구성품

CVM-780 Contact Voltmeter
CVM-780-780 CC 6ft. DB-9 Connection Cable
PFP-861LL 72 inch Green Test Lead
Q007B Common Point Ground Connector
PGA-710 Analog Connection Cable
PRS-801BC Bulldog Clip
CVM-780 Probe Assembly