SPECIFICATION
Frequency Range | 2.4 GHz |
Peak Gain | 3.2 dB |
Average Gain | -3.3 dB |
Polarization | Linear |
Impedance | 50 ohms |
Connector | SMA Terminal |
Dimensions (mm) | 19.0mm Diameter, 82.5 L x 10.3 D mm |
Warranty | 1 year limited warranty |
Frequency Range | 2.4 GHz |
Peak Gain | 3.2 dB |
Average Gain | -3.3 dB |
Polarization | Linear |
Impedance | 50 ohms |
Connector | SMA Terminal |
Dimensions (mm) | 19.0mm Diameter, 82.5 L x 10.3 D mm |
Warranty | 1 year limited warranty |
Sensitivity | 1..1000 V |
Threshold | Adjustable |
Discharge Polarity | Both |
Event Count | 4-digit counter |
Event Magnitude | LED bar |
ESD Event Indication | LED bar, buzzer |
EMI Event Rejection | CDM mode select; all events select |
Power | 9 V alkaline battery |
Dimensions | without antenna: (H x W x D) 4.73″ x 2.56″ x 0.9 (12 x 6.5 x 2.3 cm) with antenna: (H x W x D) 6.82″ x 2.56″ x 0.9 (17.3 x 6.5 x 2.3 cm) |
General | |
Audio Indicators | Speaker: Beep or analog audio with selectable volume |
External Data Storage | microSD Card |
Display | Touch LCD |
Size | 65W x 32 D x 105 L mm |
Headphone Jack | 3.5 mm *1/8 in.) |
Power Supply/Charger | Input: 100-240 VAC, 50-60 Hz Output: 5.0V 1000mA Plug: Center positive 1.3 mm I.D. x 3.5 mm O.D. |
Country of Origin | United States of America |
ESD Event Sensor | |
ESD Event Detection
Characterization
Modes | Raw input for magnitude and estimated CDM, HBM, MM using proprietary algorithm |
Raw Input Resolution | 1 Mv (1 Mv to 15 mV); 15 mV (15 mV to 1500 Mv) Detection Resolution: 1 mV |
Threshold (Display)
Resolution | 1 to 10 V, 10 to 990 V Raw input: 1 mV (1 to 15 mV) and 15 mV (15 to 1500 Mv) |
Distance Detection Range | 1.3 cm (0.5 in.) – 38.1 cm (15.0 in.) |
Event Detection Rate | 3,000 per second |
Counter Range | 0 to 32,767 counts (screen count) |
Hardware Setup | Adjustable Brightness, Auto-off-time |
CTC115 Remote Antenna
Temperature Range | -100 to 400˚F (-73 to 204˚C) |
Power | |
Power Adapter 100-240 VAC 50-60 Hz | Output: 7.5 VDC @ 1.5 A Output Plug Plarization: Cernter Positive Output Plug: 5.5 mm O.D x 2.1 mm I.D x 9.5 mm L |
ESD Event Monitor | |
Measurement | Magnitude ESD Event |
ESD Event Threshold | Default setting: 80 dBµV |
Raw Input Signal | 60 dBµV (~1mV) to 134 dBµV (~5.0V) |
Filtering Function | ESD |
Static Voltage Monitor | |
Measurement | Static Voltage – Change of electrostatic field |
Static Voltage Setting Range | 12.5 V, 100 V, 250 V, 500 V, 1000 V, smart coefficient adjust |
Output | Ethernet |
Ionizer Voltage and Decay Monitor | |
Compatible Ionizer | Steady-State DC |
Max. Decay Ttime Reading | 16 seconds** max, typical |
Max. Decay Test Voltage | ±5 V |
Connectivity | |
Input | SMA Connector for Remote antenna |
Outputs | RJ45 connector for Eternet output; 2-position terminal block for relay output |
General | |
Alarm | Buzzer |
Display | LCD |
Dimensions (antenna not included) | 3.17″ W x 2.25″ H x 1.26″D (81 mm W x 57 mm H x 32 mm D) |
Weight | 183g |