Special – 코어인사이트

SPECIFICATION


Construction	Ioniser: Anodised aluminium, PVC, epoxy resin. Air parts: Stainless steel, aluminium and brass (air nozzles).
Dimensions	Diameter: 112 mm or 178 mm. See Datasheet for specific dimensions. Can be used individually or joined together to clean wider objects.
Cable	Hi-Flex 30 kV screened cable with 70 mm bend diameter. Standard length is 3 m, longer lengths can be specified at time of order. The cable is suitable for most robot applications.
Safety	Shockless and safe to use in normal industrial applications. Emitter pin current is < 100 μmA. The HP Power Unit output is current-limited to 5 mA.
Power Unit	Use with Fraser 5.5 kV and 6 kV Power Units. The Fraser HP50-F Power Unit can supply up to four Roto-Clean devices. It requires 115 V or 230 V, 50 or 60 Hz supply. See Datasheets.
Air Supply	The air must be clean and dry. The operational pressure is from 1 Bar to 3.5 Bar maximum. Typical working pressure 2 Bar. Air fitting: 8mm push-in type.
Environmental	Clean, dry and oil-free location. 0 – 50 °C, 70 % rH non-condensing max. Noise < 80 dBA at 1 m lateral distance, without product.
Certification	CE.
Options	vailable in 2 versions: 112 mm diameter (Part No. 4900-112) or 178 mm diameter (Part No. 4900-112). Can be used in series – see Roto-Clean Mounting Kit (Part No. 49002) on Datasheet.


Construction	The Iontube consists of Fraser 1250 Static Eliminators mounted into housings welded around the circumference of a stainless steel tube. The welding is airtight. See Datasheet for pipe sizes.
Dimensions	Standard DIN pipe sizes with outside diameters of 50 mm, 80 mm and 100 mm, then in 50 mm increments to 350 mm. Other sizes and diameters are available.
Cable	2 m of HT cable is standard, unless otherwise specified. This determines the distance between the Iontube and the power unit.
Power Unit	Used with a Fraser HP Power Unit which converts the mains voltage to approx. 5.5 kV. It is current-limited with a maximum current output of 5 mA for safety.v
Certification	CE.

Construction

The Iontube consists of Fraser 1250 Static Eliminators mounted into housings welded around the circumference of a stainless steel tube.
The welding is airtight. See Datasheet for pipe sizes.

Dimensions

Standard DIN pipe sizes with outside diameters of 50 mm, 80 mm and 100 mm, then in 50 mm increments to 350 mm.
Other sizes and diameters are available.

Cable

2 m of HT cable is standard, unless otherwise specified.
This determines the distance between the Iontube and the power unit.

Power Unit

Used with a Fraser HP Power Unit which converts the mains voltage to approx. 5.5 kV.
It is current-limited with a maximum current output of 5 mA for safety.v

Certification

CE.

Model 4900

SPECIFICATION

Model 6000

SPECIFICATION