Model 9910

Advanced Measurement

scroll down

PinPulse™/PinScan™ ESD Test System

The Model 9910 PinPulse™/PinScan™ is used to determine the ESD susceptibility level of electronic devices up to ±8kV. PinPulse generates ESD pulses up to ±8kV for testing electronic devices for susceptibility to Electrostatic Discharge (ESD) using HBM, MM and HMM models. PinScan provides automatic sequencing of ESD testing of up to 128 pin devices, applying a discharge, then performing a curve-trace test to identify a failure.

video

FEATURES

Industry-Acclaimed Parasitic free waveforms
System supports 3 built-in ESD Models (HBM, HMM, MM). Optional CDM add-on.
Controlled using front panel keypad
User-accessible command set and serial interface supports user-generated software

Applications

SPECIFICATION


Dimensions	17”W x 5”H x 12”D
Construction	Metal enclosure, docks atop 9910 PinPulse.
Weight	23 lbs.
Interface	Waveform connection: Cables supplied for all supported ESD models • HBM Cable Pair, Red, Black, 6” (152mm) • MM Cable Pair, Yellow, Green, 6” (152mm) • HMM Cable Pair, Blue, Orange, 6”(152mm) Device connection: DUT stage providing connection to 128 circuits. PinScan interface is dual 64-pin ZIF sockets, .100” pin spacing.
ON/OFF	Rocker switch on front panel Indicators: Red & Green LEDs on front panel indicate status.
Communications	USB connector on rear panel.
Power	90-260 VAC, 50-60 Hz, via IEC connector on rear panel