PWA-805

Resistance Probe

scroll down

Wrist Strap Auditor

Add the capability of electrically testing your wrist straps according to ESD S1.1 Evaluation Testing Paragraph 5.1.

Measure the Interior of the Wrist Strap Cuff
Measure the Exterior of the Wrist Strap Cuff
Measure the Resistance of the Ground Cord Alone
Measure the Resistance of the Whole Wrist Strap Assembly

Use the fixture to:

Specify the best wrist strap to be worn in your facility
Spot check wrist straps being used on the floor to confirm wrist strap checker reliability
Determine which part of the wrist strap is failing and replace that part only

video

FEATURES

BENEFITS

SPECIFICATION


Power	Not applicable. Fixture powered by resistance instrument.
Dimensions	Case: (L x W x H) 4.6″ x 2.75″ x 0.95″ (11.69 x 6.99 x 6.35 cm) Two (2) top mounted metal cylinders: 1 fixed, 1 adjustable for cuff size) Cylinder Diameter: 1.25″ x 1″ H (3.18 x 2.54 cm)) Adjustable cylinder equipped with knurled locking screw for positioning
Controls	Three position rocker switch: (1) Cuff Only [Resistance between Cylinders] (2) Cuff & Cord Assembly [Resistance from cord ground point to cuff cylinder] (3) Cord Only [Resistance from cord ground point to cuff snap connections]
Connections	Megohmmeter: 2 banana receptacles for meter leads Cord Groundable Point: 1 banana receptacle 2 Cord Cuff Snaps: 1 each 7mm diameter, 1 each 4mm diameter
Weight	4.5 oz.