Resistance Meter
scroll down
ACL 306
Two-Point Resistance Checker
The Staticide® 306 Dual Point Resistance Meter offers an economical, all-in-one solution for resistance readings in small areas. Portable and lightweight, this meter is perfect for assurance checks, testing nooks and recesses, or anywhere too small for five-pound electrodes.
The metal spring-loaded pogo pins may be used with or without conductive rubber boots. The logarithmic LED scale is quick and easy to read and evaluate.
Conduct regular calibration checks using the Staticide® 307 Checker Board, equipped with logarithmically scaled 1% resistors for each decade on the meter.
The testing pads are designed with the correct spacing to accommodate the meter’s pogo pins. Every board is serial numbered and calibrated.
Ideal Applications
ㆍESD packaging and trays
ㆍIC tubes and DIP packaging
ㆍMaintenance checks
ㆍQuality control and inspection
ㆍAssembly lines
The metal spring-loaded pogo pins may be used with or without conductive rubber boots. The logarithmic LED scale is quick and easy to read and evaluate.
Conduct regular calibration checks using the Staticide® 307 Checker Board, equipped with logarithmically scaled 1% resistors for each decade on the meter.
The testing pads are designed with the correct spacing to accommodate the meter’s pogo pins. Every board is serial numbered and calibrated.
Ideal Applications
ㆍESD packaging and trays
ㆍIC tubes and DIP packaging
ㆍMaintenance checks
ㆍQuality control and inspection
ㆍAssembly lines
video
FEATURES
- Conveniently measure point-to-point resistance in a pen-sized device
- Measures areas 9.525mm wide
- Measuring range 10E3 - 10E10 ohms
- Color LED display segments
- Conforms to ANSI/ESD STM11.13
- Measurements over 10E10 ohms illuminates insulative light
- Spring loaded electrodes with conductive rubber boots
- Use for resistance testing in small specimens, parts, and hard to reach place